Canon MP150, MP160 Error Code

Turn off the printer. ( it must be turn off) then turn it on again.

E9 --------- The connected digital camera / video camera does not support Camera
Direct Printing

E14 -------- The Ink cartridges whose destination are wrong

E15 -------- Ink cartridge is not installed E16 - Ink remaining is unknown

E16-E19---- Failed to scan head alignment sheet

E22 -------- Cartridge error

E23 -------- Paper feed error

E24 -------- Purge unit error

E25 -------- ASF(cam) sensor error

E26 -------- Internal temperature rise error

E27 -------- Waste ink absorber full or platen waste ink absorber full

E28 -------- Ink cartridge temperature rise error

E29 -------- Eeprom error

E33 -------- Paper feed position error

E35-15 ---- USB Host VBUD overcurrent error - USB

E37 -17 ---- Abnormal motor driver error

E40-20 ----- Other hardware error

E42-22 ----- Scanner error


How to clear E27 Code

• With the printer powered off but connected to a power source, press the Power button while pressing and holding the Reset button.

• When the Power is lit, press the Reset button two times while pressing and holding the Power button.

• When releasing the Power button and the Reset button (regardless of order), the printer will move into a service mode. (Waiting for menu selection)

• When the on/off lights in green, press the Reset button the specified number of time(s) according to the function listed in the table below.(Each time the Reset button is pressed, the LED lights alternately in orange and green, starting with orange.)note: press 4 times for waste ink counter reset.

The number of the Reset button pressing LED Function Remarks
0 time Green Power off
1 time Orange Service pattern print (auto teste)
2 times Green EEPROM print (dados da EEPROM)
3 times Orange EEPROM reset (EEPROM reset)
4 times Green Waste ink counter reset (Absorvente reset)